Modesto Gate Pros provides professional swing gates in Modesto, CA for residential and commercial properties across the Central Valley. Swing gates are the default driveway gate whenever the ground is reasonably flat and there is arc room behind the opening, which describes most of the valley floor. We build single and dual swing gates in ornamental steel, wrought iron, aluminum, wood, and vinyl, hung on hinge posts sized for the leaf rather than borrowed from the fence line. The economics are straightforward: no track to keep clean, no rollers to replace, no counterbalance tail, and a gate that is shorter than the opening it fills. A swing gate also cycles faster than a slider, roughly 12 to 20 seconds against 20 to 35, which you notice every time you come home. On a flat orchard driveway a dual swing is usually both the cheapest and the most reliable answer. Where swing gates struggle is grade and wind. If the drive rises as the gate opens, the leaf binds within a couple of feet and no hinge adjustment fixes geometry. The usual answers are a rising-butt hinge, swinging the gate outward where setback allows, or accepting that the property wants a slider. Wind matters more on the west side of the valley, where afternoon air coming through the Diablo Range gap puts real cyclic load on a solid leaf. A 12-by-6-foot privacy panel is 72 square feet of sail hanging off one post, so we either space the boards, use a picket design, or size posts and hinges for the actual load. Hinges are where cheap gates give themselves away. Heavy-duty driveway gate hinges carry the entire leaf through two small bearing surfaces, and a bolt-on hinge under a 400-pound gate is a callback with a date on it. We use greasable ball-bearing or bushed steel hinges rated well above leaf weight, welded to a hinge stile heavy enough not to flex, on a post set in concrete below the hardpan. When a gate starts dragging, look at the latch-side gap: wider at the top means the post is leaning and the hinges are innocent. Automation on a swing gate can be a linear arm, an articulated arm where posts sit back behind the pivot, or an underground operator where the hardware should not show. Underground units look best, cost the most, and need drainage planned in a valley where flood irrigation and winter rain both find low ground. Every install gets photo eyes, an exit loop where a saw cut is possible, force limits measured to UL 325 rather than cranked to maximum, and a manual release you have actually used once. Repairs we handle constantly: resetting leaning posts, re-welding cracked hinge stiles, replacing worn hinges and cane bolts, straightening leaves that met a trailer, adjusting drop rods and latch alignment, and stripping and recoating gates that have started to bloom rust along the bottom rail.
With 20+ years of experience, our licensed and insured team brings the right materials and equipment to every job — wrought iron and ornamental steel fabrication, welded aluminum ranch and estate gates, cantilever and roller slide gates, LiftMaster, DoorKing and FAAC operators, Class I-IV operator classifications, UL 325 entrapment protection — and backs the work with a written workmanship warranty. We serve Modesto and nearby communities including Ceres, Turlock, Riverbank, Oakdale.
What We Handle
Everything our swing gates in Modesto covers
One crew, one point of contact, and the full range of swing gates work in Modesto, CA. If it is on this list we do it in house rather than handing it to a subcontractor:
- driveway swing gates
- swinging driveway gates
- single swing gate
- dual swing driveway gate
- heavy duty hinges for driveway gates
- swing gate operator
- gate hinge replacement
- gate post repair
- swing gate sagging fix
- articulated arm gate opener
- underground swing gate operator
- swing gate clearance and slope
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Modesto services.
Materials, equipment and how we do swing gates
The difference between swing gates that lasts and swing gates that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with wrought iron and ornamental steel fabrication, welded aluminum ranch and estate gates, cantilever and roller slide gates, LiftMaster, DoorKing and FAAC operators, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Modesto job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 20+ years of gate work in the Central Valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do swing gates outside Modesto
Modesto Gate Pros covers Modesto and the surrounding communities of the Central Valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Swing Gates in Ceres, CA — Stanislaus County, population 49,302
- Swing Gates in Turlock, CA — Stanislaus County, population 72,740
- Swing Gates in Riverbank, CA — Stanislaus County, population 24,865
- Swing Gates in Oakdale, CA — Stanislaus County, population 23,181
- Swing Gates in Waterford, CA — Stanislaus County, population 9,120
- Swing Gates in Hughson, CA — Stanislaus County, population 7,481
Start on the Modesto Gate Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Modesto Chooses Modesto Gate Pros
- ✓Over 20 years building and automating gates across Stanislaus County and the valley
- ✓In-house metal shop — we weld and powder coat our own gates instead of drop-shipping panels
- ✓Farm, ranch, and orchard entrances built for tractor and trailer clearance, not car clearance
- ✓Solar operators sized to your real cycle count where there is no power at the road
Every swing gates project in Modesto gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free swing gates free estimate in Modesto, or request a quote and we'll get right back to you.